Siemens C460IP Dect VoIP Phone

The Siemens Gigaset C460IP DECT IP phone is a dual mode phone system which allows DECT telephones to make VoIP call over an Internet connection, or land line calls over a fixed line connection (such as a BT phone line). One VoIP call and one fixed line call can be made at the same time with multiple handsets.

With the Gigaset C460IP you don't need a PC to start making Internet phone calls. If you like flexibility, then you'll love how easy it is to switch between internet and fixed-line calls. Just press a button. It's that easy, especially thanks to plug-and-play convenience too. One DECT handset can be used to make and receive VoIP and land line calls, switch between the two with a single key press.

The C460IP contains a DECT base-station and a single handset, in total up to 6 GAP-compatible DECT handsets can be registered with the single base station.

The Gigaset C460 IP proves that cutting-edge technology can also be brilliantly easy to use. Without the need for a PC, you simply plug-in the Gigaset C460 IP to your phone connection and in a few steps you can start phoning over the internet to your friends and family around the world. Conveniently select the internet telephony provider you prefer, like VoIPtalk on the handset's illuminated display. No matter what, you're assured Gigaset's Quality of Service (QoS) for superb internet telephony quality. VoIP doesn't get any easier than that.

Highlights

Dual mode: Easy switch from VoIP calls to fixed line calls by single keypress
Easy configuration of internet telephony (VoIP) without a PC
1 VoIP call and 1 fixed line call in parallel with multiple handsets
Convenient handsfree talking
Can make calls over VoIP (SIP) or a normal telephone line
Use like a normal DECT cordless phone
- 50m range. 300m outdoor range
- 10 hour talk time
- 150 hour standby time
Emergency calls can be routed down normal telephone line
Supports the common SIP VoIP protocol
Handset with high quality colour display
Register up to 6 GAP-compatible handsets
Transfer calls between DECT handsets
Handsfree speakerphone built into handset
UK Caller ID display (On normal telephone line)
Configuration on supplied handset or built-in web server

Download Siemens Gigaset c460IP Dect VoIP Phone Manual

Siemens C460IP Dect VoIP Phone

Hybrid: IP and fixed-net telephony
Easy set-up of IP telephony with or without a PC
Illuminated color display and keypad
Phonebook for up to 100 entries
Provider setting directly at the handset
Ethernet (IEEE 802.3) and PSTN access
Plug & Play: the unit can be used without special installation (unpack the phone, connect the phone and conduct a call)
Internal antennas
Date and time functions protected against power failure

Siemens C460IP Dect VoIP Phone

Main Features:

One phone for Internet and land line calls
One VoIP and one land line call simultaneously on multiple handsets
No PC required for phone calls
High quality colour display on handset
Purchase and register up to 6 GAPcompatible handsets
DECT Transfer calls between handsets
UK Caller ID
Multiple ring tones
Personal address book with 100 entries
Configuration using handset or built-in web server
Long battery life:
- over 150 hours standby
- over 10 hours talk time
Typical handset range:
- up to 50 metres indoors
- up to 300 metres outdoors

Handset Display:

101 x 80 pixel backlit display
4096 colours
3-line display

Handset General Information:

Standby time: over 150 hours
Talk time: over 10 hours
2x NiMH AAA Batteries
Indoor range: up to 50 metres
Outdoor range: up to 300 metres
Dimensions:
- Length: 140.7mm
- Width: 53.2mm
- Height: 28mm

Networking:

Ethernet (802.3) RJ-45 connection
Land line (PSTN) RJ-11 connection
SIP VoIP support to RFC3261
Multiple voice codec support:
G.711
G.726
G729 A/B
DHCP client
Web (HTTP) server for configuration
Quality-of-Service: ToS, DiffServ
PPPoE Termination

Siemens Gigaset C460IP VoIP Setup

Note: Siemens Gigaset handset is registered with the base unit by default.

To register it again or if you are registering an additional headset with the base station, please follow the instructions on page 32 of the User Manual.

To configure the Siemen Gigaset C460IP please follow these instructions.

1. Connect the base station's network port (on the side of the unit) to a network switch or into an ethernet port of your router.

2. Connect your handset phone line to the base station's phone port (located on the reverse side of the base station).

3. Power up the base station.

Siemens C460IP Base Station

4. The base unit will pick up an IP Address from your router's DHCP server by default. To retrieve the IP address, pick up the handset and press the menu key. Scroll down to settings and press OK then scroll down to Base and press OK. Scroll down to Local Network and press OK. You will be prompted for the system PIN which is set to 0000 by default. Enter the PIN, press OK and scroll down to the IP address option and press OK. The IP address will show up on the screen of the handset.

5. Open a web browser on a PC connected on the same network and enter the IP address you retrieved in Step 4. You will see the login screen with a Welcome message. Enter the base PIN (0000) and click on the OK button.

Siemens C460IP Login Screen

6. Select the Settings tab from the top of the screen and select the Telephony link from the left side of the screen. You will see your connection details. Uncheck the Active option under the Gigaset.net heading and click on the Edit button under IP Connection heading to bring up the SIP settings..

Siemens C460IP Settings

7. In the SIP settings, set: Authentication Name and Username to your VoIPtalk ID, Authentication password and Confirm authentication password to your six character VoIPtalk Password, Domain and Registrar server to voiptalk.org, Proxy server port and Registrar server port to 5060. Enter your name in the Display name field.

Siemens C460IP SIP Settings

8. In the Network section make sure that the Stun enabled option is set to No. Set Outbound proxy to nat.voiptalk.org and Outbound proxy port to 5065.

Siemens C460IP Network Settings

9. Scroll down to the end of page and press the Set button to save your settings.

10. You will be redirected to the status page. If all the details were entered correctly and your Internet connection is working the IP Connection Status should indicate registered.

Siemens C460IP VoIP Status

11. To confirm your settings, dial 902 from your handset. You should hear a congratulatory message thanking you for your hard work!

Siemens C460IP Dect VoIP Phone

Highlights

Siemens C460IP Dect VoIP Phone

Siemens C460IP Dect VoIP Phone

Siemens Gigaset C460IP VoIP Setup

VOIPDepot.co.uk - VOIP PBX, Asterisk hardware, VOIP phones and IP telephony.